Hunkeler LS6 stacker

Reference  2410239/10
Year  2010
Specifications

The LS6 stacker collects sheets and passes the finished stacks over to the post processing. Stack separation and stack offset are done non-stop (without printerstops).

Sheets, arriving from the pre-processing module, are transported on the stacking table using vacuum belts which allow very careful handling of the sheets avoiding any damage of the printed image.
Stack separation is accomplished without printer stops in shortest time.

The dynamic CS6 cutter interrupts the sheet stream for less than a second to allow the LS6 stacker to insert a new stacking table for the next stack. Afterwards, stacks are ejected on to the conveyor belt.
The LS6 stacker can handle 1-up to 4-up sheet streams delivered by the SE6 separation, alignment and offset module.

Technical details
Web width 165 – 520.7 mm / 6.5” – 20.5”
Paper weight 40 – 300 g/m2 / 40 – 300 g/m2
Stack height max 250 mm / max. 9.8″
Web speed 10 – 150 m/min / 33 – 490 ft/min

We have 2 Hunkeler LS6 stacking modules available

Condition used
Available from stock